Polished stones ready for making jewelry.
Budding young Earth scientists deserve educational toys as much as chemists or rocket scientists. One favorite toy is a small rock tumbler, such as the one made by NSI. Tumbling rocks to a glossy finish demonstrates the principle of mechanical erosion, while also teaching your child that geological processes are slow.
As a hobby, rock tumbling is not merely educational. Once the experiment is complete, the tumbler delivers a fistful of shiny stones to keep as cool science souvenirs or to use for jewelry, crafts and games.
Instructions
1. Wash the rock samples included with the kit to remove soil, then remove the barrel cover and place the rocks inside it, along with the kit's coarse grit. The coarse grit bag is marked "Step1." Add enough water to just barely cover the rocks.
2. Replace the barrel cover and lock it in place. Start the motor and place the barrel in its cradle.
3. Check the barrel after two days of tumbling--the rocks should have lost all their rough edges and sharp corners. If not, top off the water (if needed) and continue tumbling with the coarse grit.
4. Tumbling removed all the rough edges and sharp corners from these stones.
Pour off the dirty water and empty the stones from the tumbler. Rinse the tumbler and the stones thoroughly to get rid of all the grit.
5. Return the smoothed stones to the barrel and add the medium grit, from the bag marked "Step 2." Add water as before and tumble the contents for 12 to 14 days. Stop the barrel every two to three days and top off the water, if needed.
6. Rounded, smooth stones after the second tumbling stage.
Pour off the dirty water and grit, then empty the stones from the barrel. Scrub the tumbler thoroughly and wash the stones to remove all of the grit. Set aside any stones that broke during the tumbling.
7. Return the stones to the tumbler with enough water to cover them and tumble for two to three hours to remove any remaining grit. Empty the barrel again and wash both the barrel and the rocks.
8. Place the stones in the barrel again, along with the polish from the bag marked "Step 3." Add water to just below the top layer of stones and tumble for another seven to eight days.
9. A nicely polished agate, just right for a pendant.
Remove the stones from the tumbler, then wash and dry them.
Tags: coarse grit, stones from, along with, barrel again, barrel cover, dirty water
