Totaline makes a wide range of thermostats for your home or business. A thermostat controls your heating and cooling systems from a central panel. Totaline offers thermostats with three basic configurations, each with a different set of instructions for use. If you need to reset the unit to the manufacturer's settings, just find the model that is like yours.
Instructions
Four-Button Thermostats
1. Press the button labeled Mode and hold it down. At the same time, press the Down key.
2. Release both buttons after two seconds and hold down the Fan/Override button. Let go of the button when the display flashes or reads Fd.
3. Press the Mode button once and release. Push Mode once more to complete the reset.
Eight-Button Thermostats
4. Push the Mode and Fan keys at the same time. Release both keys after seven seconds.
5. Press Fan again and hold it until the display starts to blink or show the word Fd.
6. Push the Mode key and let it go without holding it. Press Mode once more and let it go.
Battery Thermostats
7. Slide the Program switch to the Set option. Press and hold the Next button until the Setup opens.
8. Push and release the Next button once then push it again, but hold it down this time. Don't release the button until all of the function icons display.
9. Press the Next button again and hold it down until the display says Fd. The display will not flash or blink.
10. Push Next three times in a row, but do not hold it down. Slide the switch back to Program when you're done.
Tips Warnings
Write down the reset routine and keep it near your thermostat so you can do it at any time.
Do not forget to change your settings once you finish the reset or your thermostat will not perform exactly like you want.
Tags: reset, totaline, thermostat, hold down, again hold, Next button, Push Mode, again hold down, button once, button until, Mode once, Mode once more
